Category: violinmaking
-
Corner Block Curves
By applying the bent ribs on the corner blocks, it was clear that the cuts were inaccurate. So it had to be a start over. It’s a relief that I didn’t use the actual spruce tonewood but some scrap wood. I took another piece of white wood that I got from a home center. Even…
Written by
-
Rib Bending Test
This first attempt on rib bending with the hot iron wasn’t bad, I guess. When I use a machine for first time, I often doubt if it explodes. That makes me nervous. The heat iron has to gain its temperature up to 220 degree Celsius that can’t burn even a piece of paper. But somewhat…
Written by
-
Block Plane Set Up
The block plane I got needed to be set up as I posted previously. The blade doesn’t come off evenly. So I needed this corrected. There are numerous descriptions about plane set up on the internet so this article won’t talk about every single step precisely. I just did filing the edge where the blade…
Written by
-
Block Plane
Next work will be C bout ribs preparation: thickness and bending. They won’t be glued. It’s just checking to see if the ribs can fit to the corner blocks at this point. If it does, the corner blocks will be replaced with spruce. Then finally glued with ribs. There is another task I need before…
Written by
-
Woodworking Vise
While working on the corner blocks attached to the mold, I realized the mold had to be held tightly and fixed. I looked for a woodworking vise for sale at the beginning, and soon I decided to make one. I chose to spend time rather than money. I would look for a replacement for a…
Written by
-
Clamp Prototype
Thread winding core rods from a spinning mill are here. I don’t remember how I reached to this information nor why I was looking for the things like them. Clearly, I got them not for the purpose that I came up with. I’m sure I ended up once they would be no use, Now they…
Written by
-
Corner Blocks Practice
I will not use the actual tone wood yet. I am using the white wood I got from a local home center instead for practice. Indeed, I failed by over cutting the wood by gouge so this is my second attempt. It takes time as I anticipated at the beginning.
Written by
-
Handsaw Guide
Although I tried to cut by handsaw, it was not a easy task. Over ten times attempt, only two were OK but never satisfied. I started searching for a handsaw guide and came up with an idea that I possibly could make for a temporary use. I had two blocks of wood that I would…
Written by
-
Handsaw Practice
I am a newbie in the world of wood working. I do some for piano repair, but this violin making process involves much more than I have ever done. Since cutting wood is non undoable action, I need to practice before working with actual tonewood, because they can’t be purchased at a local shops. And…
Written by
-
The Mold Preparation
Finally, I am starting the production work! Start by taking the template from the previous article and cutting it out from the mold. First, I started by cutting and removing the parts that were fixed to the frame. They must have been cut using some kind of machinery. Considering transportation, it probably made sense not…
Written by
